We are China Copper Granule Scrap Briquetting Press factory located
in Jiangsu provice.
Our Y83-6300 Copper Granule Scrap Briquetting Press gets the metal
scrap briquetted for second fusion instead of using the waste
steel, pig iron, aluminum ingot and scrap copper directly as raw
materials, lessening the melting loss and improving the utilization
of waste materials. It is commonly applied in the aluminum alloy
section plant, diverse casting plants of steel, aluminum, copper
and other materials.
This scrap metal briquette press is configured with PLC for
automatic operation. The feeding system is also adopted, keeping
high efficiency. With the diameter of 160mm, 180mm and 200mm and
the height of 300mm, the briquette can be specially designed in
size to fulfill the demands of users.
Cylinder pushing /shearing force
Maximum working pressure
Oil tank capacity
Bale dimensions (LxWxH)
Theoretical dry cicle time
PLC Automatic Control
Machine dimensions (LxWxH)
Under the situations that it is not heated or added with additives,
the scrap metal briquette press is capable of pressing diversified
granular and powdered materials into high density cylindrical
briquettes that are hard to become loose. It processes the waste
materials like scrap steel, cast iron, pig iron, aluminum ingot,
waste copper, magnesium, titanium and molybdenum for secondary
fusion instead of using them directly.
Our product makes it easy to recycle, smelt, store and transport
the scraps. Moreover, it reduces the cost and melting loss so that
the utilization rate of the waste is increased.
This product is commonly seen in the aluminum alloy section plant,
steel, aluminum and copper casting plants, etc.
This scrap metal briquette press varies in vertical and horizontal
structure. Therein, the vertical product is equipped with or
without feeding cylinder. The diameter of bale can be designed in
the designated range according to users' need. If there is no
special requirement, the machine that weighs less than 200ton is
structured with welded frame. With the weight ranging from 200ton
to 315ton, the machine is designed with welded frame or four
columns. Yet the product weighing over 500ton uses four columns.
Our scrap metal briquette press can be designed for manual
operation, single automatic operation or continuous automated
manipulation. Users are free to select the PLC system for
controlling the automatic operation as they want.
1. Due to the hydraulic drive, the machine runs stably and
2. The vertical product needs simplified foundation yet the
horizontal machine doesn't need.
3. Under the control of PLC, this scrap metal briquette press
possesses strong anti-interference capacity, high level of
automation and ease of operation.
4. Based on the demands of users, this product can be equipped with
automatic feeding and discharging devices to improve the production
efficiency and decrease the labor intensity.
5. It can be powered by diesel engine when there is no electricity
630ton scrap metal briquetting presses:
500ton Scrap Briquetting press:
250ton Scrap Briquetting Presses photos as follows:
250 ton Metal Baler:
125 ton press baler for cans, tin cans:
Waste paper balers:
Alligator shears for scrap metal cutting:
Gloden supplier for world famous brand:
Sales Manager: Cherry Feng
Sales Manager: Cherry Feng