Applicable for using in the medium and large scaled metal smelting
factory, scrap metal recycling site and other places, this
Y83Q-4000C Scrap Metal Shearing Press has been mainly exported to
Russia, Ukraine, Brazil, India and other countries. Moreover, we
have set up sole agents or distributors in these regions.
This Scrap Metal Shearing Press is configured with the occlusive
compacting box, suitable for processing the oversized waste metals
and baling the scraped vehicles. The specific size of compacting
box and the bale can be designed specially to meet the needs of
users. As for the standard specification, the machine is about
3,000mm or 5,000mm long, 1,350mm or 2,000mm wide. Based on the
processing conditions, this machine can be equipped with motor or
Cummins diesel engine.
Our machine is warranted for one year and the warranty period is
allowed to be expanded as required. Additionally, we supply users
with a range of services like installation and debugging of
machines, training for operators and so on. Our sales group will
give more product information for customers.
Scrap Metal Shearing Press Factory
Cylinder pushing /shearing force
Maximum working pressure
Press room open size
Press room close size
Bale dimensions (LxWxH)
Hydraulic Oil Cooling system
Air cooling system
Diesel Engine Power
Baler dimensions (LxWxH)
Scrap size can be cut
Square Steel: 90×90mm
Angle Iron: 180×180×15mm(3pcs)
Channel Steel: 320×90×10mm
The Y83Q series scrap metal shear baler is fabricated by absorbing
the advanced technology of similar products like the metal baler
and the metal shear at home and abroad, combing the needs of
customers and our actual operating situations.
Configured with hydraulic drive system, our machine can be operated
under manual control or automatic control of PLC. The size of
compacting box, bale size and baling mode can be designed specially
to meet users' needs. Our machine can be equipped with motor or
diesel engine as required. Additionally, we are able to help users
to install and debug the machine and train the operators.
This scrap metal shear baler is capable of cold pressing various
thin metal materials with the thickness less than 3mm into
rectangular bales at normal state, such as waste steel, scrap iron,
wire steel, etc. Moreover, this machine will cut the rectangular
bale into required length, including the steel section that is not
longer than 5m. It makes the waste metal materials convenient for
storage and transportation. This machine is also able to offer
qualified furnace charge for metal smelting plant.
1. Our scrap metal shear baler is designed reasonably with compact
structure. It is small and lightweight. Aside from small inertia of
movement and low noise, this machine offers stable movement,
flexible operation, low energy consumption, simple installation,
safe and reliable performance, etc.
2. Under the integrated hydraulic and electrical control, it
becomes user friendly and easy for overload protection.
3. This machine possesses a wide range of applications. It is able
to work as processing equipment in metal recycling industry and
Brief Introduction of Baling Process
When the clamping cylinder of the scrap metal shear baler works,
the clamping head is perceived as the locking door, users have to
put the waste materials for baling into the compacting box manually
or mechanically. With the automatic start button pressed by hand,
the left and right clamping cylinders start to work separately to
move the left and right clamping board to the position for closing
the compacting box. The pushing cylinder will move forward to press
the waste materials into bales, accomplishing the baling task.
Next, the clamping head will be opened. The bale ejector will push
the bale at certain distance for cutting with shear cylinder. This
action will be repeated without stop until the bale is about 600mm
long left. Then the cutting job is finished. When the clamping head
works, the bale ejector turns back to its original position. After
the left and right clamping boards are opened again, the automatic
baling and cutting process is done.
The scrap metal shear baler will wait for another manual press on
automatic start button to continue the work cycle. If it doesn't
need to bale and cut any more, users can push the left 600mm bale
out of the equipment by hand.
This 400ton Metal Baler Shear for Scrap metal as follows:
Larger size 630ton Scrap Baler shear for waste car:
Automatic Scrap Metal Cutting Machine for Waste Metal/Aluminum
Press baler for aluminim cans, tin cans:
Gloden supplier for world famous brand:
Sales Manager: Cherry Feng
Sales Manager: Cherry Feng